The PRO-10 is designed for high rpm competition use. Single Channel CDI.
The PRO-12 is a dual channel version of the PRO-10. The PRO-12 is designed for direct fire (waste spark) and coil per cylinder applications. It features two separate trigger inputs and coil outputs that must be fired alternately (minimum time between channels firing = 1.0 mS).
The PRO-14 is designed for direct fire, waste spark and coil per cylinder applications - Sequential. It features four trigger inputs and four coil outputs which may be configured in a number of ways.
The PRO-14b was designed primarily for vehicles with only two ignition outputs and when used in this application it will give two simultaneous outputs of 115mJ allowing the use of highly efficient CDI specific ignition coils. It will also function as a normal sequential ignition system.
The PRO-14 Rotary CDI is a special four channel unit that allows 4 outputs to be run at full power with or without split. This unit is specifically designed for the Mazda Rotary engine. It features four trigger inputs and four coil outputs which may be configured in a number of ways.
The PRO-16B - Six channel ecu/hall triggered cdi ignition (single box).
The PRO-16(Pair) - 6 channel Sequential Input (2 box).

Specifications:
- Supply Voltage = 13.8 DC (negative ground only)
- Operating Voltage = +5 to +15V (Restrictions apply)
- Ignition coil voltage = 480V (direct fire), 550V (paired trigger)
- Output is short circuit protected
- 12V tacho output
- LED indicator power/trigger
- -40degrees Celcuis to +105 degrees Celcius
- Dimensions W=110mm, H=40mm, L=110mm

Universal Product for All Evos. Please choose from the drop down menu on the right.

Stock images used. Actual product may vary.