Radium: Fuel Rail, VW 2.8L 12V VR6
This fuel rail ships with two different fuel rail mounts depending on the lower intake manifold. The early model engine uses an aluminum lower intake manifold and requires the long fuel rail mounts included in the kit.
The late model engine uses a polymer lower intake manifold. It requires the short fuel rail mounts included in the kit. With late model lower intake manifolds, a Radium Engineering fuel pulse damper can be used in the center port. This fuel rail is compatible with the OEM late model upper intake manifold when using OEM equivalent fuel injectors.
The OEM injector retaining clips can be reused.
Like the OEM fuel rails, the injector bores are 14mm ID so factory injectors, or any OEM equivalent aftermarket injector can be used. Aftermarket injectors must match the OEM height and o-ring dimensions. Radium does not make any fuel injector recommendations other than "OEM equivalent".
Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.
Stock Images Used. Actual Product May Vary.