This optional carbon fibre lid is 68% lighter than the powder coated aluminium lid that comes standard with all Radium Engineering RA-Series fuel cells.

Construction: Dry Carbon
Fabric: Pre-impregnated
Tow: 3K Filaments Per Fibre
Weave: 2x2 Twill
Manufactured: USA

NOTES:
1. This product is currently only available for 14 and 10 gallon (shown above) RA-series fuel cells.
2. Discontinued 15 gallon RA-Series Fuel Cells are compatible with 13-0410-01.
3. If purchasing with a fuel cell, this product will come in a separate box and will need to be installed by the end user.
4. The standard Radium Engineering aluminium lid cannot be exchanged.
5. Follow the instructions below for installing this lid.

a. If removing a drop-in fuel pump assembly, such as an FCST, reference those specific instructions.
b. Use a 5/32" (or 4mm) Allen wrench for the stainless steel button head bolts.
c. Use a 7/16" wrench for the flange head nuts underneath the perimeter bolts.
d. When reinstalling, torque the perimeter bolts to 6.8-Nm (60-inlbs).
d. For the Phillips head screws that secure the inspection plate, use a micro screwdriver.
e. Be careful not to over tighten any bolts that could crack the carbon fibre resin.

Stock images used. Product may vary.